Stocks
Showing 577–588 of 958 results
-
OMD -2008 Measuring Cell DECKMA
$1.00OMD -2008 Measuring Cell DECKMA
The OMD-2008 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15ppm Oily Water Separator Systems. The performance and specifications of the OMD-2008 comply with IMO Resolution MEPC.107 (49).
$1.00 -
OMD Detector complete, Graviner Make, KG7-1-53836-K269, HSC: 85311030 00
$1.00 -
OMRON (Motor Relay)= SE-SP2N
$1.00 -
OMRON Motor Relay=H3CR
$1.00 -
OMRON TIMER = H3DR-M
$1.00 -
Omron Automation and Safety H2F-DF AC100/110/120
$1.00Omron Automation and Safety H2F-DF AC100/110/120
653-H2FDFAC100110120H2F-DF AC100/110/120Omron Automation and SafetyOmron Time Switch$1.00 -
Omron Automation and Safety SDV-FH6 AC100/110
$1.00Omron Automation and Safety SDV-FH6 AC100/110
653-SDVFH6AC100110SDV-FH6 AC100/110Omron Automation and SafetySensor Hardware & Accessories VOLTAGE SENSORSensor HardwareSensorsSDVFH6AC100/110 SDVFH6AC100110 SDVFH6AC10011012.345887 oz$1.00 -
Omron Corporation SE-SP2N MOTOR RELAY
$1.00 -
OMRON CURRENT SENSOR=SAO-Q 1 N
$1.00OMRON CURRENT SENSOR=SAO-Q 1 N
Mfr Part No : SAO-Q1NMfr : OmronDescription : Industrial Current Sensors MOTOR PROTECTIVE RELAY$1.00 -
OMRON CURRENT SENSOR=SAO-R2N
$1.00OMRON CURRENT SENSOR=SAO-R2N
OmronIndustrial Current SensorsSAOOmron Automation and SafetyCurrent SensorsSensorsSAOR2N170 g$1.00 -
OMRON CURRENT SENSOR=SAO-S 2 N
$1.00OMRON CURRENT SENSOR=SAO-S 2 N
Product model: SAO-S2NName: Current SensorBrand: OMRONOutput voltage: 24 V.
Output current: 2.5 A.
Screw terminal Model: Without Bus Line (See note 2.).$1.00 -
Omron H3DR-M Timer
$1.00Omron H3DR-M Timer
- All settings are made though front panel
- Six operating modes in a single timer provides flexibility for many applications
- Economical ON-delay only models available in six, single-time ranges
- Wide timing range of 0.12 seconds to 120 hours
- Fine adjustment dial for precise time setting
- Name plates provide for easy timer identification and management
- Terminal block accepts both fork or bar-sleeve connectors
$1.00