XP95 High Temp Heat Detector

$1.00

Apollo 55000-401APO XP95 High Temp 90°C Heat Detector. The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature.

Category:

Description

Apollo 55000-401APO XP95 High Temp 90°C Heat Detector.

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature.

This high temperature detector, classified as a CS devicem will report an alarm at 90°C.

Features

  • Ideal in environments that are dirty or smoky under natural conditions
  • Can be installed in a typical ambient temperature of 55°C
  • Well suited for warehouses, loading bays and carparks
  • Unaffected by wind or atmospheric pressure

Technical Data:

Manufacturer Code: 55000-401APO
Dimensions (H x W x D): D100mm x H42mm
Weight:  105g
Approval: EN54-5, SBSC, BOSEC, CPR, KRS, LPCB
Material: Polycarbonate
Sensor Type: Chevron CS
Supply Voltage: 17 to 28V DC
Operating Temperature: -20 to 70°C
IP Rating:  IP54

Reviews

There are no reviews yet.

Be the first to review “XP95 High Temp Heat Detector”

Your email address will not be published. Required fields are marked *

Related products

  • CCI Power Supply=VT25-373-99/X9

    $1.00

    CCI Power Supply=VT25-373-99/X9

    VT25-373-99/X9 KONGSBERG CCI POWER SUPPLY LLC 20-60VDC CONVERTER CONVERTER CONCEPTS INC. MODEL: VT25-373-99/X9 INPUT:20-60 V-DC@3A SER:AH9625022 RELAY
    CONDITION: NEW 3 PCS Stock and USED -6 PCS Stock

    Category:
    $1.00

  • Fellow Kogyo FOCAS-1800 – Surplus Unit

    $1.00

    Fellow Kogyo FOCAS-1800 – Surplus Unit

    Product Description

    Measuring Method

    The FOCAS-1800 using a full optical continuous measuring method* can sure grasp changes of oil concentration every moment while providing a very quick measurement response.

    The light coming form optical elements is received by multiple optical elements. Then, a complicated analysis about changes of oil type or concentration add differences of pattern due to mixed foreign substances can be made by CPU and software in an instant through calculation.

     

    Features

    • This product adopts an automatic operation method using sample water pressure which is matched to the operation of an oil separator or pump.
    • The automatic washing function of the detection unit can reduce troublesome manual washing work, (Optional)
    • An error code indication provided at occurrence of a device fault and a stain indication of the detection unit facilitates maintenance and inspection. The product has a high-maintainability structure.
    • The device can be calibrated on a ship or on the side by using a calibration unit. (However, the qualification for calibration specified by the manufacturer is required).
    • Operation records such as trouble alarms can be saved in a memory card and confirmed as required.
    • The product can measure only the oil concentration and is not affected by SS content (floating turbidity substance other than oil content) and surface active agent.
    • For alarms, a double safety method is used. When the oil concentration is 15 ppm or more, an oil alarm is output. When sample water is defective or the instrument is defective, a trouble alarm is output.
    Category:
    $1.00

  • INTRINSIC SAFE CIRCUITS = PWB 9150064-133

    $1.00

    INTRINSIC SAFE CIRCUITS = PWB 9150064-133
    Category:
    $1.00