Rivertrace Engg SMART Bilge
HOME / SERVICES / Rivertrace Engg SMART Bilge
Rivertrace Engg SMART Bilge
RIVERTRACE
SMARTBILGE MAJOR PARTS IDENTIFICATION
Please use this page to identify the part number of the part that you require. Finding the Operating Voltage, Serial number or Manufacture date
SMARTBILGE ASSEMBLY OVERVIEW
SMART BILGE WITH AUTOCLEAN AND FLOW SWITCH
| PART NO. | DESCRIPTION |
|---|---|
| 109159 | 109159 SmartBilge & Cell - 24VAC 50/60Hz - Standard |
| 110229 | 110229 SmartBilge & Cell - 24VAC 50Hz With Autoclean only. |
| 110689 | 110689 SmartBilge & Cell - 24VAC 50Hz With Flow Switch only. |
| 110622 | 110622 SmartBilge & Cell - 24VAC 50Hz With Autoclean and Flow Switch. |
| 109158 | SmartBilge & Cell - 115VAC 50/60Hz - Standard |
| 110228 | SmartBilge & Cell - 115VAC 50Hz With Autoclean only. |
| 110688 | SmartBilge & Cell - 115VAC 50Hz With Flow Switch only. |
| 110621 | 110621 SmartBilge & Cell - 115VAC 50Hz With Autoclean and Flow Switch. |
| 109073 | SmartBilge & Cell - 230VAC 50/60Hz - Standard |
| 110227 | SmartBilge & Cell - 230VAC 50Hz With Autoclean only |
| 110687 | SmartBilge & Cell - 230VAC 50Hz With Flow Switch only. |
| 110620 | SmartBilge & Cell - 230VAC 50Hz With Autoclean and Flow Switch |
MAIN SPARE PARTS
When purchasing a replacement controller PCB, it is important to state any special settings that may be required from the list below:
- 5ppm Maximum alarm set-points
- Autoclean enabled
- Flow switch enabled
If no special settings are required, the standard software settings shall be applied that consist of the following:
- 15ppm Maximum alarm set-points
- No Autoclean capability
- No flow switch capability
INSTALLATION INSTRUCTIONS FOR YOUR REPLACEMENT CONTROLLER PCB CAN BE FOUND HERE.
